Tel: +86-551-63523918

PP Fiber Monofilament Form

View More

  • PP Fiber Monofilament Form
  • PP Fiber Monofilament Form
  • PP Fiber Monofilament Form

PP Fiber Monofilament Form

  • FOB Price: 2.00-2.30 USD / kg
  • MOQ: 1000 kg
  • Supply Capability: 500000 kg / month
  • Port: Qingdao
  • Delivery: prompt
  • Packaging: 1kgs net per PE bag, 20kgs net per woven bag.

Details

Polypropylene Fiber Monofilament Form  

FUNCTION:  

    ◆Resist to shrink & crack  

    ◆Increase seepage resistance  

    ◆Increase friction resistance  

    ◆Increase freezing & thawing resistance  

    ◆Improve tendons protection  

    ◆Replace steel net (using in plastering)  

    ◆ Prevent mortar split and crackle expansion  

    ◆Increase impact resistance and peeling resistance  

SUITABLE PROJECT:  

A). Be suitable for the water–proof layer, floor, inner & outer wall of industrial and civil construction.  

B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.  

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.  

D). Be suitable for any mortar projects and fine aggregate concrete projects.  

FEATURE:  

1. Easy to be dispersed in mortar or concrete and no agglomeration, it can guarantee the property of crack resistance effectively  

2. Easy to be used: No need to change the proportion of mortar, just put the fibers into the mortar mixture and stir for a moment after adding water.  

3. It with fine economic property: The equivalent diameter of PP monofilament is only φ 0.03mm, so the ratio of diameter and surface area is high and on the basis of crack resistance, it can reduce the amount (to about 0.6kg/m 3 ).  

4. Easy to plaster: As the great number of thin fibers spread into mortar evenly, the plastering is much easily and this can improve the binding strength between surface and base.  

5. It with stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects. 

 

SPECIFICATION:  

    ◆Raw Material---------------Polypropylene  

    ◆Crack Elongation----------15-20%  

    ◆Fiber Type------------------monofilament  

    ◆Fiber Dia.--------------------0.03+/-0.005mm  

    ◆Melting Point(℃)----------160—170  

    ◆Density(g/cm3)--------------0.91  

    ◆Acid &Alkali Resistance---Strong  

    ◆Tensile Strength (MPa)----500Mpa min.  

    ◆Length: 6mm/12mm/19mm etc..  

APPLYING INSTRUCTION:  

A). Compound Amount. To resist the common cracks on surfaces, 0.6kg/m3 fibers to cement paint is enough, and for reinforced application 0.9-1kg/m3 is enough.  

B). Stirring requirement. The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water (Do not stir without water!) and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.  

Packing:  as per customers requirement

You may also be interested in the following product(s)